Glow Plug Light (Diesel) on a Aston Martin DBS
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Aston Martin DBS
On a diesel Aston Martin DBS, the coiled glow-plug light is normal at start-up: it shows the glow plugs are pre-heating the cylinders. You wait for it to go out before cranking. If it flashes after warm-up, it signals a glow-plug or engine management fault.
How Urgent Is the Glow Plug Light (Diesel)?
In terms of priority, treat this as a low concern on your Aston Martin DBS. The single most useful thing you can observe is whether the Glow Plug Light (Diesel) is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Aston Martin DBS drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the Glow Plug Light (Diesel)
When the Glow Plug Light (Diesel) shows up on a Aston Martin DBS, it rarely arrives completely alone — there are usually subtle clues if you know where to look. Drivers often notice a change in how the Aston Martin DBS responds, an unfamiliar sound, or a warning message on the instrument cluster. Cataloguing these symptoms is not busywork; each one narrows the list of likely causes and helps a technician zero in on the real fault instead of replacing parts on a hunch.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
There is rarely a single universal reason the Glow Plug Light (Diesel) appears on a Aston Martin DBS; instead there is a shortlist of usual suspects. Root causes range from simple, inexpensive items to genuine component failures, which is why a proper diagnosis always beats guessing. Understanding the common triggers on the Aston Martin DBS helps you have a more informed conversation with your mechanic and avoid paying for parts you do not need.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Aston Martin DBS
Fixing the Glow Plug Light (Diesel) on a Aston Martin DBS is methodical, not mysterious. Start with the quick, no-cost checks, then let the vehicle's own trouble codes guide you toward the specific system at fault. The ordered steps here are designed so that by the time you (or your technician) reach the more involved work, you have already eliminated the easy explanations.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Safe-to-drive depends on judgement, and here is the technician's version for a Aston Martin DBS: respect the colour, respect the behaviour. Given this light's low urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Aston Martin DBS showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Hard cold starts plus a flashing glow-plug light on a diesel Aston Martin DBS usually means one or more plugs have failed — replace them as a set for even starting.
Do not ignore a flashing glow light; on many diesels it doubles as a general engine fault warning, so scan it rather than guessing.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Aston Martin DBS?
The Glow Plug Light (Diesel) illuminates on a Aston Martin DBS when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.
Can I keep driving with the Glow Plug Light (Diesel) on?
For a Aston Martin DBS, a steady amber Glow Plug Light (Diesel) with normal driving generally allows a careful trip to a garage. A red or flashing light, or any change in performance, means you should stop and avoid further driving until the fault is identified.
How much does it cost to fix the Glow Plug Light (Diesel) on a Aston Martin DBS?
Repair cost for the Glow Plug Light (Diesel) on your Aston Martin DBS depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.
Will the Glow Plug Light (Diesel) reset itself on a Aston Martin DBS?
Sometimes the Glow Plug Light (Diesel) on a Aston Martin DBS clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.