Brake System Warning Light on a Chery Tiggo 2
Stop safely as soon as possible. Continuing to drive risks serious damage or a safety hazard.
What the Brake System Warning Light Means on a Chery Tiggo 2
A red brake warning light on a Chery Tiggo 2 is serious: it points to a problem with the braking system itself — most often low brake fluid, but sometimes a hydraulic fault or a pressure imbalance. Braking performance can be compromised, so treat it as urgent.
How Urgent Is the Brake System Warning Light?
Urgency level for this indicator on the Chery Tiggo 2: critical. Reading the colour is the fastest gut-check — a red symbol asks you to stop and investigate quickly, while amber or yellow means schedule a check soon rather than immediately. Green and blue symbols are simply telling you a system is active. Whatever the colour, the safest habit is to note when the Brake System Warning Light appeared, how the Chery Tiggo 2 is behaving, and whether the light is steady or flashing, because a flashing warning almost always means act now.
Common Symptoms Alongside the Brake System Warning Light
Alongside the Brake System Warning Light, Chery Tiggo 2 owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Chery Tiggo 2 does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- Red BRAKE symbol illuminated
- Soft, spongy or sinking brake pedal
- Brake fluid low in the reservoir
- Longer stopping distances
- Sometimes lit with the handbrake released
What Causes the Brake System Warning Light to Come On?
Why did the Brake System Warning Light come on in your Chery Tiggo 2? The honest answer is 'it depends', but the possibilities cluster into a recognisable set of causes. Knowing them in advance means you will not be caught off guard by a diagnosis, and it lets you sanity-check any repair quote against what commonly goes wrong on the Chery Tiggo 2.
- Low brake fluid level
- A hydraulic fluid leak
- Worn brake pads dropping fluid level
- Faulty brake fluid level sensor
- Parking brake not fully released
How to Fix the Brake System Warning Light on a Chery Tiggo 2
To resolve the Brake System Warning Light on your Chery Tiggo 2, resist the urge to simply disconnect the battery and hope it stays off. A warning that is cleared without addressing the cause almost always returns. The step-by-step approach below is the same logical order a professional follows on the Chery Tiggo 2: confirm the basics, read the stored codes, then target the actual fault.
- Confirm the parking brake is fully off
- Check the brake fluid reservoir level immediately
- If the pedal feels soft or fluid is low, do not drive — arrange recovery
- Look under the car for fluid leaks at the wheels
- Have the brake system inspected and bled by a technician
Is It Safe to Drive With the Brake System Warning Light On?
Drivers ask this constantly, and the answer for the Chery Tiggo 2 is nuanced. A steady amber Brake System Warning Light with no change in how the car drives usually means you can continue carefully and get it looked at soon. A red or flashing Brake System Warning Light, unusual noises, warning messages, or a drop in performance are your cue to stop the Chery Tiggo 2 safely and avoid further driving until the cause is known.
Diagnostic Trouble Codes Linked to the Brake System Warning Light
If you scan a Chery Tiggo 2 showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
C0035 |
Left Front Wheel Speed Sensor Circuit The ABS module has lost a valid signal from the left front wheel speed sensor. |
C0110 |
ABS Pump Motor Circuit Malfunction The ABS hydraulic pump motor circuit has failed, disabling anti-lock function. |
Professional Mechanic Tips
Low fluid is often just worn pads pulling the level down; top up only with the correct DOT spec and get the pads measured.
If the brake pedal on a Chery Tiggo 2 goes soft or sinks to the floor with this light on, stop driving — that is a hydraulic failure, not a sensor glitch.
Frequently Asked Questions
Why is the Brake System Warning Light on in my Chery Tiggo 2?
On a Chery Tiggo 2, the Brake System Warning Light comes on because a monitored value crossed a threshold the car considers abnormal. It could be a simple, inexpensive cause or a genuine fault — the only way to be sure is to scan the vehicle and interpret the codes rather than guess from the symbol alone.
Can I keep driving with the Brake System Warning Light on?
It depends on the urgency (critical) and how your Chery Tiggo 2 is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the Brake System Warning Light on a Chery Tiggo 2?
Cost varies widely because the Brake System Warning Light can stem from several causes on a Chery Tiggo 2. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the Brake System Warning Light reset itself on a Chery Tiggo 2?
Sometimes the Brake System Warning Light on a Chery Tiggo 2 clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.