ABS Warning Light on a Chrysler Sebring
Have this checked promptly. It is not an immediate stop, but do not ignore it for long.
What the ABS Warning Light Means on a Chrysler Sebring
On the Chrysler Sebring, an illuminated ABS symbol indicates the system found a fault — commonly a wheel speed sensor — and switched off ABS. You retain standard braking, but should have it checked so full safety function is restored.
How Urgent Is the ABS Warning Light?
Urgency level for this indicator on the Chrysler Sebring: high. Reading the colour is the fastest gut-check — a red symbol asks you to stop and investigate quickly, while amber or yellow means schedule a check soon rather than immediately. Green and blue symbols are simply telling you a system is active. Whatever the colour, the safest habit is to note when the ABS Warning Light appeared, how the Chrysler Sebring is behaving, and whether the light is steady or flashing, because a flashing warning almost always means act now.
Common Symptoms Alongside the ABS Warning Light
Alongside the ABS Warning Light, Chrysler Sebring owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Chrysler Sebring does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- ABS light steady on the dash
- Anti-lock not engaging on hard stops
- Sometimes paired with the traction/ESP light
- Speedometer glitches (shared sensor)
What Causes the ABS Warning Light to Come On?
The ABS Warning Light on the Chrysler Sebring can be triggered by several conditions, and experienced technicians work through them from most to least likely. Some causes are trivial and cost almost nothing to correct, while others require replacing a sensor or component. The list below reflects what actually turns this light on in the real world, so you can gauge whether you are likely facing a quick fix or a workshop visit.
- Faulty wheel speed sensor
- Damaged sensor wiring or tone ring
- Low brake fluid
- ABS module or pump fault
- Blown fuse
How to Fix the ABS Warning Light on a Chrysler Sebring
To resolve the ABS Warning Light on your Chrysler Sebring, resist the urge to simply disconnect the battery and hope it stays off. A warning that is cleared without addressing the cause almost always returns. The step-by-step approach below is the same logical order a professional follows on the Chrysler Sebring: confirm the basics, read the stored codes, then target the actual fault.
- Check the brake fluid level first
- Scan for ABS (C-series) trouble codes
- Inspect wheel speed sensors and wiring for damage
- Clean or replace the faulty sensor / tone ring
- Clear codes and road-test to confirm ABS returns
Is It Safe to Drive With the ABS Warning Light On?
Whether it is safe to keep driving your Chrysler Sebring with the ABS Warning Light on comes down to urgency (high) and behaviour. As a rule, if the light is red or flashing, or the Chrysler Sebring is running poorly, stop somewhere safe and arrange help rather than pushing on. If the light is amber and the car drives normally, you generally have time to reach a workshop — but 'have time' is not the same as 'ignore it', so book a check promptly.
Diagnostic Trouble Codes Linked to the ABS Warning Light
If you scan a Chrysler Sebring showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
C0035 |
Left Front Wheel Speed Sensor Circuit The ABS module has lost a valid signal from the left front wheel speed sensor. |
C0110 |
ABS Pump Motor Circuit Malfunction The ABS hydraulic pump motor circuit has failed, disabling anti-lock function. |
Professional Mechanic Tips
Corrosion on the sensor tip or tone ring is a common, cheap cause — worth cleaning before condemning the module.
Remember you still have brakes; just leave extra stopping distance and avoid slamming the pedal until ABS is restored.
Frequently Asked Questions
Why is the ABS Warning Light on in my Chrysler Sebring?
On a Chrysler Sebring, the ABS Warning Light comes on because a monitored value crossed a threshold the car considers abnormal. It could be a simple, inexpensive cause or a genuine fault — the only way to be sure is to scan the vehicle and interpret the codes rather than guess from the symbol alone.
Can I keep driving with the ABS Warning Light on?
For a Chrysler Sebring, a steady amber ABS Warning Light with normal driving generally allows a careful trip to a garage. A red or flashing light, or any change in performance, means you should stop and avoid further driving until the fault is identified.
How much does it cost to fix the ABS Warning Light on a Chrysler Sebring?
Repair cost for the ABS Warning Light on your Chrysler Sebring depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.
Will the ABS Warning Light reset itself on a Chrysler Sebring?
Sometimes the ABS Warning Light on a Chrysler Sebring clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.