Glow Plug Light (Diesel) on a Hyundai i20
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Hyundai i20
The glow-plug light on your diesel Hyundai i20 is your cue to wait a couple of seconds before starting in cold weather. A flashing light after the engine is running, however, indicates a fault the ECU wants checked.
How Urgent Is the Glow Plug Light (Diesel)?
In terms of priority, treat this as a low concern on your Hyundai i20. The single most useful thing you can observe is whether the Glow Plug Light (Diesel) is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Hyundai i20 drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the Glow Plug Light (Diesel)
Alongside the Glow Plug Light (Diesel), Hyundai i20 owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Hyundai i20 does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
The Glow Plug Light (Diesel) on the Hyundai i20 can be triggered by several conditions, and experienced technicians work through them from most to least likely. Some causes are trivial and cost almost nothing to correct, while others require replacing a sensor or component. The list below reflects what actually turns this light on in the real world, so you can gauge whether you are likely facing a quick fix or a workshop visit.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Hyundai i20
The right way to clear the Glow Plug Light (Diesel) on a Hyundai i20 is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Safe-to-drive depends on judgement, and here is the technician's version for a Hyundai i20: respect the colour, respect the behaviour. Given this light's low urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Hyundai i20 showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Do not ignore a flashing glow light; on many diesels it doubles as a general engine fault warning, so scan it rather than guessing.
Hard cold starts plus a flashing glow-plug light on a diesel Hyundai i20 usually means one or more plugs have failed — replace them as a set for even starting.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Hyundai i20?
Your Hyundai i20 turned on the Glow Plug Light (Diesel) after its self-diagnostics flagged an issue in that system. Because several different faults can trigger the same symbol, the smart first move is an OBD-II scan to pull the specific code before you spend any money.
Can I keep driving with the Glow Plug Light (Diesel) on?
For a Hyundai i20, a steady amber Glow Plug Light (Diesel) with normal driving generally allows a careful trip to a garage. A red or flashing light, or any change in performance, means you should stop and avoid further driving until the fault is identified.
How much does it cost to fix the Glow Plug Light (Diesel) on a Hyundai i20?
Repair cost for the Glow Plug Light (Diesel) on your Hyundai i20 depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.
Will the Glow Plug Light (Diesel) reset itself on a Hyundai i20?
Occasionally, yes — a Hyundai i20 can extinguish the Glow Plug Light (Diesel) by itself when the monitored value returns to normal. But a light that keeps coming back is a clear sign of an unresolved issue that needs a proper diagnosis rather than repeated resets.