Glow Plug Light (Diesel) on a Infiniti Q60
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Infiniti Q60
On a diesel Infiniti Q60, the coiled glow-plug light is normal at start-up: it shows the glow plugs are pre-heating the cylinders. You wait for it to go out before cranking. If it flashes after warm-up, it signals a glow-plug or engine management fault.
How Urgent Is the Glow Plug Light (Diesel)?
In terms of priority, treat this as a low concern on your Infiniti Q60. The single most useful thing you can observe is whether the Glow Plug Light (Diesel) is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Infiniti Q60 drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the Glow Plug Light (Diesel)
Alongside the Glow Plug Light (Diesel), Infiniti Q60 owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Infiniti Q60 does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
The Glow Plug Light (Diesel) on the Infiniti Q60 can be triggered by several conditions, and experienced technicians work through them from most to least likely. Some causes are trivial and cost almost nothing to correct, while others require replacing a sensor or component. The list below reflects what actually turns this light on in the real world, so you can gauge whether you are likely facing a quick fix or a workshop visit.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Infiniti Q60
The right way to clear the Glow Plug Light (Diesel) on a Infiniti Q60 is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Safe-to-drive depends on judgement, and here is the technician's version for a Infiniti Q60: respect the colour, respect the behaviour. Given this light's low urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Infiniti Q60 showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Hard cold starts plus a flashing glow-plug light on a diesel Infiniti Q60 usually means one or more plugs have failed — replace them as a set for even starting.
Do not ignore a flashing glow light; on many diesels it doubles as a general engine fault warning, so scan it rather than guessing.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Infiniti Q60?
Your Infiniti Q60 turned on the Glow Plug Light (Diesel) after its self-diagnostics flagged an issue in that system. Because several different faults can trigger the same symbol, the smart first move is an OBD-II scan to pull the specific code before you spend any money.
Can I keep driving with the Glow Plug Light (Diesel) on?
It depends on the urgency (low) and how your Infiniti Q60 is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the Glow Plug Light (Diesel) on a Infiniti Q60?
Cost varies widely because the Glow Plug Light (Diesel) can stem from several causes on a Infiniti Q60. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the Glow Plug Light (Diesel) reset itself on a Infiniti Q60?
Sometimes the Glow Plug Light (Diesel) on a Infiniti Q60 clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.