Urgency: Low

Glow Plug Light (Diesel) on a Kia Optima

This is usually informational. Address it at your convenience.

What the Glow Plug Light (Diesel) Means on a Kia Optima

The glow-plug light on your diesel Kia Optima is your cue to wait a couple of seconds before starting in cold weather. A flashing light after the engine is running, however, indicates a fault the ECU wants checked.

How Urgent Is the Glow Plug Light (Diesel)?

In terms of priority, treat this as a low concern on your Kia Optima. The single most useful thing you can observe is whether the Glow Plug Light (Diesel) is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Kia Optima drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.

Common Symptoms Alongside the Glow Plug Light (Diesel)

The Glow Plug Light (Diesel) on your Kia Optima is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Kia Optima is exactly what turns a vague warning into a specific, fixable diagnosis.

  • Light on briefly at cold start (normal)
  • Flashing light after warm-up (fault)
  • Hard starting when cold
  • Rough running or white smoke on cold mornings

What Causes the Glow Plug Light (Diesel) to Come On?

Why did the Glow Plug Light (Diesel) come on in your Kia Optima? The honest answer is 'it depends', but the possibilities cluster into a recognisable set of causes. Knowing them in advance means you will not be caught off guard by a diagnosis, and it lets you sanity-check any repair quote against what commonly goes wrong on the Kia Optima.

  • Normal pre-heat cycle (steady, brief)
  • One or more failed glow plugs
  • Glow plug relay fault
  • Crankshaft/camshaft sensor issue
  • Related engine management fault

How to Fix the Glow Plug Light (Diesel) on a Kia Optima

The right way to clear the Glow Plug Light (Diesel) on a Kia Optima is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.

  1. At cold start, wait for the light to go out before cranking
  2. If it flashes, scan for glow-plug and engine codes
  3. Test each glow plug for resistance/continuity
  4. Replace failed plugs (ideally as a set) and check the relay
  5. Clear codes and confirm easy cold starts

Is It Safe to Drive With the Glow Plug Light (Diesel) On?

Safe-to-drive depends on judgement, and here is the technician's version for a Kia Optima: respect the colour, respect the behaviour. Given this light's low urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.

Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)

If you scan a Kia Optima showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.

CodeMeaning
P0335 Crankshaft Position Sensor Circuit
The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition.

Professional Mechanic Tips

Field notes from Marcus Vale, ASE-Certified Master Technician
Do not ignore a flashing glow light; on many diesels it doubles as a general engine fault warning, so scan it rather than guessing.
Hard cold starts plus a flashing glow-plug light on a diesel Kia Optima usually means one or more plugs have failed — replace them as a set for even starting.

Frequently Asked Questions

Why is the Glow Plug Light (Diesel) on in my Kia Optima?

The Glow Plug Light (Diesel) illuminates on a Kia Optima when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.

Can I keep driving with the Glow Plug Light (Diesel) on?

For a Kia Optima, a steady amber Glow Plug Light (Diesel) with normal driving generally allows a careful trip to a garage. A red or flashing light, or any change in performance, means you should stop and avoid further driving until the fault is identified.

How much does it cost to fix the Glow Plug Light (Diesel) on a Kia Optima?

Cost varies widely because the Glow Plug Light (Diesel) can stem from several causes on a Kia Optima. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.

Will the Glow Plug Light (Diesel) reset itself on a Kia Optima?

Occasionally, yes — a Kia Optima can extinguish the Glow Plug Light (Diesel) by itself when the monitored value returns to normal. But a light that keeps coming back is a clear sign of an unresolved issue that needs a proper diagnosis rather than repeated resets.