Glow Plug Light (Diesel) on a Mitsubishi L200
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Mitsubishi L200
The glow-plug light on your diesel Mitsubishi L200 is your cue to wait a couple of seconds before starting in cold weather. A flashing light after the engine is running, however, indicates a fault the ECU wants checked.
How Urgent Is the Glow Plug Light (Diesel)?
Urgency level for this indicator on the Mitsubishi L200: low. Reading the colour is the fastest gut-check — a red symbol asks you to stop and investigate quickly, while amber or yellow means schedule a check soon rather than immediately. Green and blue symbols are simply telling you a system is active. Whatever the colour, the safest habit is to note when the Glow Plug Light (Diesel) appeared, how the Mitsubishi L200 is behaving, and whether the light is steady or flashing, because a flashing warning almost always means act now.
Common Symptoms Alongside the Glow Plug Light (Diesel)
The Glow Plug Light (Diesel) on your Mitsubishi L200 is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Mitsubishi L200 is exactly what turns a vague warning into a specific, fixable diagnosis.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
Why did the Glow Plug Light (Diesel) come on in your Mitsubishi L200? The honest answer is 'it depends', but the possibilities cluster into a recognisable set of causes. Knowing them in advance means you will not be caught off guard by a diagnosis, and it lets you sanity-check any repair quote against what commonly goes wrong on the Mitsubishi L200.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Mitsubishi L200
Fixing the Glow Plug Light (Diesel) on a Mitsubishi L200 is methodical, not mysterious. Start with the quick, no-cost checks, then let the vehicle's own trouble codes guide you toward the specific system at fault. The ordered steps here are designed so that by the time you (or your technician) reach the more involved work, you have already eliminated the easy explanations.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Safe-to-drive depends on judgement, and here is the technician's version for a Mitsubishi L200: respect the colour, respect the behaviour. Given this light's low urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Mitsubishi L200 showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Do not ignore a flashing glow light; on many diesels it doubles as a general engine fault warning, so scan it rather than guessing.
Hard cold starts plus a flashing glow-plug light on a diesel Mitsubishi L200 usually means one or more plugs have failed — replace them as a set for even starting.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Mitsubishi L200?
The Glow Plug Light (Diesel) illuminates on a Mitsubishi L200 when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.
Can I keep driving with the Glow Plug Light (Diesel) on?
Short answer: sometimes, but not indefinitely. Given this indicator's low priority, respect the warning colour and the car's behaviour. When in doubt with your Mitsubishi L200, the safe choice is to stop and have it checked rather than risk further damage.
How much does it cost to fix the Glow Plug Light (Diesel) on a Mitsubishi L200?
Repair cost for the Glow Plug Light (Diesel) on your Mitsubishi L200 depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.
Will the Glow Plug Light (Diesel) reset itself on a Mitsubishi L200?
Sometimes the Glow Plug Light (Diesel) on a Mitsubishi L200 clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.