Urgency: High

ABS Warning Light on a Nissan Murano

Have this checked promptly. It is not an immediate stop, but do not ignore it for long.

What the ABS Warning Light Means on a Nissan Murano

This light tells you the anti-lock system on your Nissan Murano is offline. The car will still stop, but in an emergency stop the wheels could lock, so treat it as a safety item to resolve soon.

How Urgent Is the ABS Warning Light?

How worried should you be? For the ABS Warning Light on a Nissan Murano, the urgency is high. A good rule technicians rely on is 'colour plus behaviour': match the warning colour against how the car is actually performing. If the Nissan Murano still drives normally and the light is steady, you usually have time to plan a proper diagnosis; if performance drops or the light flashes, err on the side of caution and stop safely.

Common Symptoms Alongside the ABS Warning Light

When the ABS Warning Light shows up on a Nissan Murano, it rarely arrives completely alone — there are usually subtle clues if you know where to look. Drivers often notice a change in how the Nissan Murano responds, an unfamiliar sound, or a warning message on the instrument cluster. Cataloguing these symptoms is not busywork; each one narrows the list of likely causes and helps a technician zero in on the real fault instead of replacing parts on a hunch.

  • ABS light steady on the dash
  • Anti-lock not engaging on hard stops
  • Sometimes paired with the traction/ESP light
  • Speedometer glitches (shared sensor)

What Causes the ABS Warning Light to Come On?

The ABS Warning Light on the Nissan Murano can be triggered by several conditions, and experienced technicians work through them from most to least likely. Some causes are trivial and cost almost nothing to correct, while others require replacing a sensor or component. The list below reflects what actually turns this light on in the real world, so you can gauge whether you are likely facing a quick fix or a workshop visit.

  • Faulty wheel speed sensor
  • Damaged sensor wiring or tone ring
  • Low brake fluid
  • ABS module or pump fault
  • Blown fuse

How to Fix the ABS Warning Light on a Nissan Murano

The right way to clear the ABS Warning Light on a Nissan Murano is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.

  1. Check the brake fluid level first
  2. Scan for ABS (C-series) trouble codes
  3. Inspect wheel speed sensors and wiring for damage
  4. Clean or replace the faulty sensor / tone ring
  5. Clear codes and road-test to confirm ABS returns

Is It Safe to Drive With the ABS Warning Light On?

Whether it is safe to keep driving your Nissan Murano with the ABS Warning Light on comes down to urgency (high) and behaviour. As a rule, if the light is red or flashing, or the Nissan Murano is running poorly, stop somewhere safe and arrange help rather than pushing on. If the light is amber and the car drives normally, you generally have time to reach a workshop — but 'have time' is not the same as 'ignore it', so book a check promptly.

Diagnostic Trouble Codes Linked to the ABS Warning Light

If you scan a Nissan Murano showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.

CodeMeaning
C0035 Left Front Wheel Speed Sensor Circuit
The ABS module has lost a valid signal from the left front wheel speed sensor.
C0110 ABS Pump Motor Circuit Malfunction
The ABS hydraulic pump motor circuit has failed, disabling anti-lock function.

Professional Mechanic Tips

Field notes from Marcus Vale, ASE-Certified Master Technician
Remember you still have brakes; just leave extra stopping distance and avoid slamming the pedal until ABS is restored.

Frequently Asked Questions

Why is the ABS Warning Light on in my Nissan Murano?

On a Nissan Murano, the ABS Warning Light comes on because a monitored value crossed a threshold the car considers abnormal. It could be a simple, inexpensive cause or a genuine fault — the only way to be sure is to scan the vehicle and interpret the codes rather than guess from the symbol alone.

Can I keep driving with the ABS Warning Light on?

Short answer: sometimes, but not indefinitely. Given this indicator's high priority, respect the warning colour and the car's behaviour. When in doubt with your Nissan Murano, the safe choice is to stop and have it checked rather than risk further damage.

How much does it cost to fix the ABS Warning Light on a Nissan Murano?

Repair cost for the ABS Warning Light on your Nissan Murano depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.

Will the ABS Warning Light reset itself on a Nissan Murano?

Occasionally, yes — a Nissan Murano can extinguish the ABS Warning Light by itself when the monitored value returns to normal. But a light that keeps coming back is a clear sign of an unresolved issue that needs a proper diagnosis rather than repeated resets.