Transmission Temperature Light on a Subaru WRX
Have this checked promptly. It is not an immediate stop, but do not ignore it for long.
What the Transmission Temperature Light Means on a Subaru WRX
On the Subaru WRX, this red light means automatic transmission fluid temperature has climbed too high — often from towing, heavy loads, or low/old fluid. Continuing risks expensive gearbox harm.
How Urgent Is the Transmission Temperature Light?
How worried should you be? For the Transmission Temperature Light on a Subaru WRX, the urgency is high. A good rule technicians rely on is 'colour plus behaviour': match the warning colour against how the car is actually performing. If the Subaru WRX still drives normally and the light is steady, you usually have time to plan a proper diagnosis; if performance drops or the light flashes, err on the side of caution and stop safely.
Common Symptoms Alongside the Transmission Temperature Light
The Transmission Temperature Light on your Subaru WRX is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Subaru WRX is exactly what turns a vague warning into a specific, fixable diagnosis.
- Transmission temp warning lit
- Delayed or harsh shifts
- Burning smell
- Transmission slipping under load
- Often appears when towing or climbing hills
What Causes the Transmission Temperature Light to Come On?
Why did the Transmission Temperature Light come on in your Subaru WRX? The honest answer is 'it depends', but the possibilities cluster into a recognisable set of causes. Knowing them in advance means you will not be caught off guard by a diagnosis, and it lets you sanity-check any repair quote against what commonly goes wrong on the Subaru WRX.
- Heavy towing or load
- Low transmission fluid level
- Old, degraded fluid
- Blocked transmission cooler
- Stuck thermostat or failing pump
How to Fix the Transmission Temperature Light on a Subaru WRX
The right way to clear the Transmission Temperature Light on a Subaru WRX is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- Pull over safely and let the transmission cool with the engine idling in park
- Reduce load and avoid stop-start driving until cool
- Check transmission fluid level and condition
- Have the cooler and fluid inspected
- Service the fluid or repair the cooling circuit as diagnosed
Is It Safe to Drive With the Transmission Temperature Light On?
Drivers ask this constantly, and the answer for the Subaru WRX is nuanced. A steady amber Transmission Temperature Light with no change in how the car drives usually means you can continue carefully and get it looked at soon. A red or flashing Transmission Temperature Light, unusual noises, warning messages, or a drop in performance are your cue to stop the Subaru WRX safely and avoid further driving until the cause is known.
Diagnostic Trouble Codes Linked to the Transmission Temperature Light
If you scan a Subaru WRX showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0700 |
Transmission Control System Malfunction A general request from the transmission control module indicating a stored transmission fault. |
P0740 |
Torque Converter Clutch Circuit Malfunction The torque converter lock-up clutch circuit is not responding correctly, affecting shifting and economy. |
Professional Mechanic Tips
Burnt-smelling, dark transmission fluid is overdue for a change — old fluid is a leading cause of overheating.
Frequently Asked Questions
Why is the Transmission Temperature Light on in my Subaru WRX?
On a Subaru WRX, the Transmission Temperature Light comes on because a monitored value crossed a threshold the car considers abnormal. It could be a simple, inexpensive cause or a genuine fault — the only way to be sure is to scan the vehicle and interpret the codes rather than guess from the symbol alone.
Can I keep driving with the Transmission Temperature Light on?
Short answer: sometimes, but not indefinitely. Given this indicator's high priority, respect the warning colour and the car's behaviour. When in doubt with your Subaru WRX, the safe choice is to stop and have it checked rather than risk further damage.
How much does it cost to fix the Transmission Temperature Light on a Subaru WRX?
Cost varies widely because the Transmission Temperature Light can stem from several causes on a Subaru WRX. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the Transmission Temperature Light reset itself on a Subaru WRX?
Sometimes the Transmission Temperature Light on a Subaru WRX clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.