Auto Start-Stop Light on a Peugeot 108
This is usually informational. Address it at your convenience.
What the Auto Start-Stop Light Means on a Peugeot 108
The auto start-stop light on a Peugeot 108 indicates the system that shuts the engine off at idle (to save fuel) is active or has just operated. An amber version can mean it is currently unavailable, often due to battery or climate demands.
How Urgent Is the Auto Start-Stop Light?
How worried should you be? For the Auto Start-Stop Light on a Peugeot 108, the urgency is low. A good rule technicians rely on is 'colour plus behaviour': match the warning colour against how the car is actually performing. If the Peugeot 108 still drives normally and the light is steady, you usually have time to plan a proper diagnosis; if performance drops or the light flashes, err on the side of caution and stop safely.
Common Symptoms Alongside the Auto Start-Stop Light
Alongside the Auto Start-Stop Light, Peugeot 108 owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Peugeot 108 does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- Start-stop A symbol lit
- Engine cuts out at a standstill
- Amber/crossed symbol when unavailable
- Follows the start-stop button
What Causes the Auto Start-Stop Light to Come On?
The Auto Start-Stop Light on the Peugeot 108 can be triggered by several conditions, and experienced technicians work through them from most to least likely. Some causes are trivial and cost almost nothing to correct, while others require replacing a sensor or component. The list below reflects what actually turns this light on in the real world, so you can gauge whether you are likely facing a quick fix or a workshop visit.
- Start-stop operating normally
- Weak or aging battery preventing stops
- High climate-control demand
- Battery sensor fault
- System switched off by the driver
How to Fix the Auto Start-Stop Light on a Peugeot 108
The right way to clear the Auto Start-Stop Light on a Peugeot 108 is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- Confirm whether start-stop was switched off
- Understand it disables when the battery is low or AC demand is high
- Have the battery and its sensor tested if it never works
- Replace an aged battery with the correct AGM/EFB type
- Scan for battery-management faults if needed
Is It Safe to Drive With the Auto Start-Stop Light On?
Safe-to-drive depends on judgement, and here is the technician's version for a Peugeot 108: respect the colour, respect the behaviour. Given this light's low urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Professional Mechanic Tips
If start-stop stopped working on your Peugeot 108, suspect the battery first — these systems disable themselves the moment battery health drops.
Fitting the wrong battery type (a plain lead-acid instead of AGM/EFB) is a classic reason start-stop quits working after a battery change.
Frequently Asked Questions
Why is the Auto Start-Stop Light on in my Peugeot 108?
On a Peugeot 108, the Auto Start-Stop Light comes on because a monitored value crossed a threshold the car considers abnormal. It could be a simple, inexpensive cause or a genuine fault — the only way to be sure is to scan the vehicle and interpret the codes rather than guess from the symbol alone.
Can I keep driving with the Auto Start-Stop Light on?
It depends on the urgency (low) and how your Peugeot 108 is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the Auto Start-Stop Light on a Peugeot 108?
There is no single price for the Auto Start-Stop Light on a Peugeot 108; it ranges from a no-cost adjustment to a component replacement. The honest way to control cost is to diagnose the exact code before authorising any repair, so you only pay to fix what is actually wrong.
Will the Auto Start-Stop Light reset itself on a Peugeot 108?
Sometimes the Auto Start-Stop Light on a Peugeot 108 clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.