Glow Plug Light (Diesel) on a Subaru Impreza
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Subaru Impreza
The glow-plug light on your diesel Subaru Impreza is your cue to wait a couple of seconds before starting in cold weather. A flashing light after the engine is running, however, indicates a fault the ECU wants checked.
How Urgent Is the Glow Plug Light (Diesel)?
Urgency level for this indicator on the Subaru Impreza: low. Reading the colour is the fastest gut-check — a red symbol asks you to stop and investigate quickly, while amber or yellow means schedule a check soon rather than immediately. Green and blue symbols are simply telling you a system is active. Whatever the colour, the safest habit is to note when the Glow Plug Light (Diesel) appeared, how the Subaru Impreza is behaving, and whether the light is steady or flashing, because a flashing warning almost always means act now.
Common Symptoms Alongside the Glow Plug Light (Diesel)
When the Glow Plug Light (Diesel) shows up on a Subaru Impreza, it rarely arrives completely alone — there are usually subtle clues if you know where to look. Drivers often notice a change in how the Subaru Impreza responds, an unfamiliar sound, or a warning message on the instrument cluster. Cataloguing these symptoms is not busywork; each one narrows the list of likely causes and helps a technician zero in on the real fault instead of replacing parts on a hunch.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
The Glow Plug Light (Diesel) on the Subaru Impreza can be triggered by several conditions, and experienced technicians work through them from most to least likely. Some causes are trivial and cost almost nothing to correct, while others require replacing a sensor or component. The list below reflects what actually turns this light on in the real world, so you can gauge whether you are likely facing a quick fix or a workshop visit.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Subaru Impreza
Fixing the Glow Plug Light (Diesel) on a Subaru Impreza is methodical, not mysterious. Start with the quick, no-cost checks, then let the vehicle's own trouble codes guide you toward the specific system at fault. The ordered steps here are designed so that by the time you (or your technician) reach the more involved work, you have already eliminated the easy explanations.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Safe-to-drive depends on judgement, and here is the technician's version for a Subaru Impreza: respect the colour, respect the behaviour. Given this light's low urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Subaru Impreza showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Hard cold starts plus a flashing glow-plug light on a diesel Subaru Impreza usually means one or more plugs have failed — replace them as a set for even starting.
Do not ignore a flashing glow light; on many diesels it doubles as a general engine fault warning, so scan it rather than guessing.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Subaru Impreza?
On a Subaru Impreza, the Glow Plug Light (Diesel) comes on because a monitored value crossed a threshold the car considers abnormal. It could be a simple, inexpensive cause or a genuine fault — the only way to be sure is to scan the vehicle and interpret the codes rather than guess from the symbol alone.
Can I keep driving with the Glow Plug Light (Diesel) on?
It depends on the urgency (low) and how your Subaru Impreza is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the Glow Plug Light (Diesel) on a Subaru Impreza?
Repair cost for the Glow Plug Light (Diesel) on your Subaru Impreza depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.
Will the Glow Plug Light (Diesel) reset itself on a Subaru Impreza?
Sometimes the Glow Plug Light (Diesel) on a Subaru Impreza clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.